hjlab/hachan-lab1@0.0.0
No description| Node | Description |
|---|---|
| lab1 | No description |
| jk-flipflop | No description |
| d-flipflop | No description |
| modified-buffer | No description |
| button-1 | No description |
| lab1-ver2 | No description |
| electricfan-button | No description |
| 3xgate-1gate | Allows data to pass through 3 parallel data lines if and only if Gate1 and Gate 2 are HIGH. |
| 3xgate-2gate | Allows data to pass through 3 parallel data lines if and only if Gate1 and Gate 2 are HIGH. |
| ifelse-6input-3out-bool | Selects lines A when Select is Low and lines B when Select is High. |
| select-mode-gate-3input-3selectout | Input to S is from button
Input to Multi is in 1 or 0 |
| select-mode-gate-1input-1atatimeoutput | No description |
| ifelse-6input-3out-num | Selects lines A when Select is Low and lines B when Select is High. |
| gate-2gate | No description |
| potentiometer-out | No description |
| rgb-out | No description |
| test | No description |
| decimal-hex-string | No description |
| triple-adc | No description |
| number-hex-string | No description |
| number-string | No description |
| count-to-n1 | Counts from 0 to N-1 then resets and starts again. Each step taks T seconds |
| rotary-encoder | No description |
| customtype-rotaryencoder11and11inc-decr | No description |
| 2beep | No description |
| count-to-n1-copy | Counts from 0 to N-1 then resets and starts again. Each step taks T seconds |