number to 4 digits 7 segment Display with decimal point. Version vor segment output latching with sn74hc573
2018-10-12 ⋯ 4 versions ⋯ 2018-10-14
Libraries
Sort by
Library Name
gst/4digits-sevensegment@1.0.3
gst/absolutehumidity@0.1.1
Computes the absolute humidity of the air in gramm pro m³ . This is for example usefull to control ventilation systems.
2019-09-29 ⋯ 3 versions ⋯ 2019-09-29
gst/countupdown@1.0.0
increments and decrements a number , the output can presettet with the offset input
2021-03-27
gst/digital-read-pullup@1.1.0
Digital read with integrated pullup resistor
0.30.0 ready
2018-12-09 ⋯ 2 versions ⋯ 2019-07-22
gst/ee-prom-read-write-uint16bit@0.0.0
Read and write unsigned integer value 16bit (0-65535) from /to the internal EE-Prom
2022-06-14
gst/eeprom-read-write-uint16bit@0.0.1
Read and write unsigned integer value 16bit (0-65535) from /to the internal eeprom
2022-06-16
gst/lm75atempsensor@1.2.0
Read´s the temperature from LM75A i2c temperatursensor with 11 bit (0.125°C) resolution
0.30.0 ready
2018-12-26 ⋯ 5 versions ⋯ 2019-07-20
gst/mcp3421@1.0.2
a-d converter with 18 bit resolution and i2c interface
2022-04-05 ⋯ 3 versions ⋯ 2022-04-05
gst/number-split-to-digit@1.0.0
split´s a number e.g. 2345 into digits 2-3-4-5
numbers between 0 and 9999 are allowed
2018-10-09
gst/pwm-prescaler-set@0.0.2
Supports alternativ PWM frequencies for MEGA2560
Attention! Timer0 is also used for other tasks (millis, micros, delay).
Timer0 = D4 and D13
Timer1 = D11, D12
Timer2 = D9, D10
Timer3 = D2, D3, D5
Timer4 = D6, D7, D8
Timer5 = D44, D45, D46
Prescaler 1= 31372,55Hz, 2= 3921,16Hz, 3= 490Hz, 4= 122.55Hz 5= 30Hz (in case of timer0 the PWM frequency for prescaler values 1-5 are doubled)
2021-07-02 ⋯ 3 versions ⋯ 2021-07-04
gst/workingtimecounter@0.1.0
counts the time when the EN input is true saves the counted time to eeprom if power off
2022-06-22 ⋯ 2 versions ⋯ 2022-06-23