Libraries

greenberg-nicholas/try2@0.0.0
No description
2021-06-29
greensnakeru/sollartrack@0.0.0
No description
2021-04-07
gregmotorshop/time@0.14.2
Convert a number (seconds) into three strings (hours / minutes / seconds) + Convert a number (seconds) into a string (HHh MMmn SSs)
2018-01-09 ⋯ 2 versions ⋯ 2018-01-09
gsm73/welcome-to-xod@0.29.0
A crash course tutorial baked as a project
2019-11-28
gst/4digits-sevensegment@1.0.3
number to 4 digits 7 segment Display with decimal point. Version vor segment output latching with sn74hc573
2018-10-12 ⋯ 4 versions ⋯ 2018-10-14
gst/absolutehumidity@0.1.1
Computes the absolute humidity of the air in gramm pro m³ . This is for example usefull to control ventilation systems.
2019-09-29 ⋯ 3 versions ⋯ 2019-09-29
gst/average@1.0.0
Average a incomming number at the output.
2019-01-03
gst/countupdown@1.0.0
increments and decrements a number , the output can presettet with the offset input
2021-03-27
gst/digital-read-pullup@1.1.0
Digital read with integrated pullup resistor 0.30.0 ready
2018-12-09 ⋯ 2 versions ⋯ 2019-07-22
gst/ee-prom-read-write-uint16bit@0.0.0
Read and write unsigned integer value 16bit (0-65535) from /to the internal EE-Prom
2022-06-14
gst/eeprom-read-write-uint16bit@0.0.1
Read and write unsigned integer value 16bit (0-65535) from /to the internal eeprom
2022-06-16
gst/lm75atempsensor@1.2.0
Read´s the temperature from LM75A i2c temperatursensor with 11 bit (0.125°C) resolution 0.30.0 ready
2018-12-26 ⋯ 5 versions ⋯ 2019-07-20
gst/mcp3421@1.0.2
a-d converter with 18 bit resolution and i2c interface
2022-04-05 ⋯ 3 versions ⋯ 2022-04-05
gst/number-choice-string@1.0.0
No description
2018-09-06
gst/number-split-to-digit@1.0.0
split´s a number e.g. 2345 into digits 2-3-4-5 numbers between 0 and 9999 are allowed
2018-10-09
gst/pwm-prescaler-set@0.0.2
Supports alternativ PWM frequencies for MEGA2560 Attention! Timer0 is also used for other tasks (millis, micros, delay). Timer0 = D4 and D13 Timer1 = D11, D12 Timer2 = D9, D10 Timer3 = D2, D3, D5 Timer4 = D6, D7, D8 Timer5 = D44, D45, D46 Prescaler 1= 31372,55Hz, 2= 3921,16Hz, 3= 490Hz, 4= 122.55Hz 5= 30Hz (in case of timer0 the PWM frequency for prescaler values 1-5 are doubled)
2021-07-02 ⋯ 3 versions ⋯ 2021-07-04
gst/sevensegment@1.0.0
number 0-15 to 7segment 0-f
2018-10-08
gst/time-delay@1.0.2
various time relays
2018-08-31 ⋯ 3 versions ⋯ 2019-03-08
gst/workingtimecounter@0.1.0
counts the time when the EN input is true saves the counted time to eeprom if power off
2022-06-22 ⋯ 2 versions ⋯ 2022-06-23
gweimer/ds-rtc@0.0.4
Add read-temp node to list of ds-rtc nodes provided in xod-dev
2020-04-01 ⋯ 4 versions ⋯ 2020-04-03
gweimer/h-bridge@0.31.0
Expanded h-bridge node to handle h-bridge with 2 direction pins for a single motor. - Updated for XOD 0.31.x
2018-01-23 ⋯ 2 versions ⋯ 2019-10-21
gweimer/hc-sr04-ultrasonic@0.0.3
Copy of std Ultrasonic range, but returns Max distance on failure so we can assume nothing close to us. My sensor seems to go low on ping capture, not success, so I changed timeout to max round trip to get full range.
2018-03-30 ⋯ 2 versions ⋯ 2024-03-07
gweimer/ir-remote@0.0.7
Read IR remote
2018-02-22 ⋯ 7 versions ⋯ 2020-04-14
gweimer/lcd-i2c-init@0.1.1
Update LCD display on I2C. Specify Columns and Rows. Init pin can be used to prevent extra clear displays. Passing null string for a Line will leave the line untouched; space will clear a line. Variadic pins for rows of text to display.
2018-01-22 ⋯ 6 versions ⋯ 2021-02-01
gweimer/servo@0.0.4
Enhanced servo implementations to detach servo and allow it to free-wheel (or allow other nodes to control the servo)
2018-01-22 ⋯ 4 versions ⋯ 2018-02-12