No description
2023-03-24
Libraries
Sort by
Owner
maksimbaturin/digital-clock@0.1.0
This example describes how to use the datetime and ds-rtc libraries, format date and time values, and work with real-time clock (RTC) modules for Arduino. Upon the completion of this guide, you will learn how to create a simple digital clock based on a DS1307 I2C RTC module and I2C LCD display.
2023-04-08 ⋯ 3 versions ⋯ 2023-04-10
maksimbaturin/digital-clock-en@0.1.1
This is a modified library of digital clocks for LCD 1602 with support for Russian characters. The original project from XOD "Digital Clock Example — Working with RTC Modules" was taken as a basis. If you wish, you can contact me via Google mail.
2023-04-10 ⋯ 3 versions ⋯ 2023-04-11
maksimbaturin/filament-counter@0.0.0
It became necessary to create a filament counter for your 3d printer. During the writing of the program, I created a new multiplication node. I used the hall sensor and the ssd1306 LED display on the i2c bus .
2023-12-30
maksimbaturin/non-volatile-u32-counter@0.0.1
A non-volatile integer counter with a calculation result from 0.00 to 4294967000.00. The result of the calculations is converted into a 32-bit unsigned integer, represented as four bytes. The result of the calculations is recorded in the eeprom by a signal from the voltage monitoring port. After resuming the voltage on the chip, the eeprom is read first, followed by further calculations. The resulting number can be further used in subsequent calculations or displayed on the LCD.
2024-01-16 ⋯ 2 versions ⋯ 2024-01-18
manatee/lcd-i2c@1.0.1
With this library you can use your LCD with I2C adapter super easy! Check documentation to understand how to use it!
2018-04-19 ⋯ 2 versions ⋯ 2018-04-19
marcoaita/malibrary@0.0.4
A library of code used for training on XOD at www.biomaker.org
2018-06-30 ⋯ 4 versions ⋯ 2018-07-03
maxifrit/projekt-menu-rysiek@1.0.0
all thinx to bild paintball symulation bomb ( self ideas)
2022-06-29
mci-ryan/longpress-button@0.0.3
Long press button / toggle node.
Press and hold input button for desired count and count interval to flip-flop between true / false output.
2021-07-09 ⋯ 3 versions ⋯ 2021-08-11
mci-ryan/single-input-multibutton@0.0.0
Allows the use of multiple buttons on a single analog input.
Each button to be wired in series with differing levels of resistors to create voltage outputs of differing values.
2021-08-11
mci-ryan/tolerance@0.0.2
Node to easily check whether or not a measured/read value is within a specific tolerance percentage of a target value.
De-clutters and simplifies the task via the use of basic math and the "between" node.
2023-02-08 ⋯ 3 versions ⋯ 2023-02-09
mercier-joshua/stepper-28byj-48-with-3-push-buttons-direction-and-pot-speed@1.0.0
Allows you to control the 28BYJ-48 Steppers direction (CW, STOP, and CCW) with three push buttons and the speed with a Potentiometer
2021-06-12 ⋯ 3 versions ⋯ 2021-06-19
michael-altmann/numpad4x4readout@0.0.0
This patch allows to readout a 4x4 numpad connected with all 8 wires to the arduino. Use 10 k Resistors on the 4 read-pins on ground to get some pulldown. Testing required.
2021-08-29