Absolute orientation sensor. Arduino library for the BNO055 breakout (https://learn.adafruit.com/adafruit-bno055-absolute-orientation-sensor/). Wraps Adafruit Unified BNO055 Driver (https://github.com/adafruit/Adafruit_BNO055).

Library for RTC DS1302 ....... testing

This is an extention to the fine work of gabbapeople's ViSi Genie Library and will install it automaticly allong with ALL the ViSi Genie Objects (some Blocks still need to be tested)

buffer1 Buffer object A buffer of bytes/words for other libraries that need a buffer https://github.com/awgrover/xod-buffer

Average a incomming number at the output.

Nodes to read analog infrared range meters by Sharp (GP2Y0A) and convert the signal to distance values.

Read´s the temperature from LM75A i2c temperatursensor with 11 bit (0.125°C) resolution 0.30.0 ready

Library to work with gen4-ulcd-D/DT display modules by 4D Systems. This library describes basic operations with common ViSI-Genie objects of the 4D Systems workshop IDE.

Just a bunch of utilities, Nodes and Conversions

A simplified one dimensional Kalman filter implementation for Arduino.

Arduino Client for MQTT (Updated) This library provides a client for doing simple publish/subscribe messaging with a server that supports MQTT.

utility conversions to bridge different worlds: data-to-pulse, true-to-pulse

awgrover/adafruit-neopixel-ll Arduino library for controlling single-wire-based LED pixels and strip (Neopixels). Mechanically converted by https://forum.xod.io/u/awgrover using github.com:awgrover/arduino-2-xod from: Adafruit NeoPixel (Adafruit_NeoPixel) by Adafruit. Version 1.1.7 https://github.com/adafruit/Adafruit_NeoPixel

Drives stepper motors connected through a step/dir driver board

Simple way to manage 28BYJ-48 steppers

Digital read with integrated pullup resistor 0.30.0 ready

Adafruit SleepyDog Arduino Library Arduino library to use the watchdog timer for system reset and low power sleep. Currently supports the following hardware: Arduino Uno or other ATmega328P-based boards. Arduino Mega or other ATmega2560- or 1280-based boards. Arduino Zero, Adafruit Feather M0 (ATSAMD21). Arduino Leonardo or other 32u4-based boards. Partial support for Teensy 3.X and LC (watchdog, no sleep). Adafruit Trinket and other boards using ATtiny MCUs are NOT supported.

Calulation for redirecting a Joystickmovement into trigometically arranged cylinders.

Block for the MCUFRIEND_kbv range of TFT-LCD Touch Displays (Tested on the XC-4630 Duinotech clone, should work for all)

Library for nokia 5510 monochrome display