Libraries

bradzilla84/433mhz-rcswitch@0.0.4
Use your Arduino with a suitable transmitter to operate remote radio controlled devices. This method should work with most popular low-cost power outlet sockets and light switches with 315/433mHz support. All you need is an Arduino, ESP8266, etc, a 315/433MHz transmitter. And your existing remote control devices with a SC5262 / SC5272, HX2262 / HX2272, PT2262 / PT2272, EV1527, RT1527, FP1527 or HS1527 chipset. Also supports Intertechno outlets. (Initial testing works great but further testing is needed)
2019-02-02 ⋯ 4 versions ⋯ 2019-02-25
bradzilla84/pubsub-mqtt@0.1.8
Arduino Client for MQTT (Updated) This library provides a client for doing simple publish/subscribe messaging with a server that supports MQTT.
2018-12-17 ⋯ 13 versions ⋯ 2019-02-16
bradzilla84/bradzilla84-utilities@0.0.4
Just a bunch of utilities, Nodes and Conversions
2018-12-17 ⋯ 4 versions ⋯ 2019-02-02
bradzilla84/mlx90614-ir-temp-sensor@0.1.0
This is a library for the MLX90614 Non-Contact IR temperature sensor.
2019-02-02
bradzilla84/visi-genie-extra-library@0.1.5
This is an extention to the fine work of gabbapeople's ViSi Genie Library and will install it automaticly allong with ALL the ViSi Genie Objects (some Blocks still need to be tested)
2019-01-16 ⋯ 6 versions ⋯ 2019-01-19
bradzilla84/kalman-filter@0.0.2
A simplified one dimensional Kalman filter implementation for Arduino.
2018-12-17 ⋯ 2 versions ⋯ 2018-12-17
bradzilla84/sleepydog@0.0.1
Adafruit SleepyDog Arduino Library Arduino library to use the watchdog timer for system reset and low power sleep. Currently supports the following hardware: Arduino Uno or other ATmega328P-based boards. Arduino Mega or other ATmega2560- or 1280-based boards. Arduino Zero, Adafruit Feather M0 (ATSAMD21). Arduino Leonardo or other 32u4-based boards. Partial support for Teensy 3.X and LC (watchdog, no sleep). Adafruit Trinket and other boards using ATtiny MCUs are NOT supported.
2018-12-08
bradzilla84/color-tft-lcd-driver-mcufriend-kbv@0.0.1
Block for the MCUFRIEND_kbv range of TFT-LCD Touch Displays (Tested on the XC-4630 Duinotech clone, should work for all)
2018-12-07
bradzilla84/color-rgb-hsl@0.0.3
Some Base Color Blocks to implement in other Library's
2018-12-06 ⋯ 3 versions ⋯ 2018-12-06
bradzilla84/serial-plotter@0.0.1
Just a simple serial plotter that you can plot multiple signals at the same time (still in alpha)
2018-12-06
bradzilla84/singen@0.0.1
SinGen library. Generate's through PWM, two sinusoidal signals opposite each other, the frequency is determined by Hz
2018-12-05
bradzilla84/touch-adafruit@0.1.2
This is a touch display Wrapper for the common Adafruit TouchScreen. Can be used to map display to touch values and make Keypads and Menus.(More examle's to come)
2018-11-19 ⋯ 3 versions ⋯ 2018-11-29
bradzilla84/74hc595@0.0.4
The 74HC595 is a “8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. Normal use 3 pins, or 5 pin with Enable and Clear. (With the assistance of Cesars)
2018-11-25 ⋯ 4 versions ⋯ 2018-11-28
bradzilla84/x2125@0.0.7
Memsic MX2125 Dual-axis Accelerometer library for Arduino
2018-11-21 ⋯ 7 versions ⋯ 2018-11-23
bradzilla84/preset-select@0.0.3
Just a quick example of a preset select/Pack/Unpack Patch...Can Be adjusted in code to more or less inputs (Unfortunately XOD doesn't support Variadic with more outputs than in..)
2018-11-21 ⋯ 3 versions ⋯ 2018-11-21
bradzilla84/i2c-pwm-servo-16ch@0.0.1
This is an example of the Adafruit 16-channel PWM & Servo driver Just a simple wrapper (NEEDS TESTING)
2018-11-18
bradzilla84/arduino-tft-lib@0.1.0
This library enables an Arduino board to communicate with the Arduino TFT LCD screen. It simplifies the process for drawing shapes, lines, images(COMING SOON), and text to the screen. The Arduino TFT library extends the Adafruit GFX, and Adafruit ST7735 libraries that it is based on. The GFX library is responsible for the drawing routines, while the ST7735 library is specific to the screen on the Arduino TFT. The Arduino specific additions were designed to work as similarly to the Processing API as possible. This is just a Wrapper for the Arduino TFT Library........
2018-11-18
bradzilla84/ftoled@0.0.1
For use with Freetronics OLED128 128x128 pixel OLED display(Just a test Lib, Stay tuned for Auduino TFT Lib to be released soon to support TFT LCD's in general)
2018-11-13
bradzilla84/neopixel@0.0.2
Basic Functionality for NeoPixel Strip (See Examples)
2018-11-13 ⋯ 2 versions ⋯ 2018-11-13