koadrobot/devices@0.1.3

License: GPL 3.0

Device nodes with additional params. 0.0.1 [03.02.2019]: kled -(lum/sig/lum-blink/sig-blink), kbutton, 0.0.2 [04.02.2019]: kthermo -(dht11/dewpoint/soundspeed), 0.0.3 [04.02.2019]: ksonic -(hcsr04-mrtt/ping), 0.0.4 [05.02.2019]: k74hc595 -(booleans/byte/byte2/shiftout), 0.0.5 [06.02.2019]: ksegment7-(ports), 0.0.6 [08.02.2019]: kpot -(duty/step) 0.1.0 [11.02.2019]: First Released. 0.1.1 [20.02.2019]: kservo .(rds3115) 0.1.2 [23.02.2019]: Added info. 0.1.3 [23.04.2019]: Correct k74hc595.
NodeDescription
aallNo description
k74hc595(booleans)No description
k74hc595(byte)No description
k74hc595(byte2)No description
k74hc595(shiftout)No description
kbutton
Device is Button. It has debounce time.
kled(byte-of-4x4)
Port 0..3 is High. Port 4..7 is Low. Led0-H0L0-P0P7-113 Led1-H0L1-P0P6-114 Led2-H0L2-P0P5-116 Led3-H0L3-P0P4-120 Led4-H1L0-P1P7-177 Led5-H1L1-P1P6-178 Led6-H1L2-P1P5-180 Led7-H1L3-P1P4-184 Led8-H2L0-P2P7-209 Led9-H2L1-P2P6-210 Led10-H2L2-P2P5-212 Led11-H2L3-P2P4-216 Led12-H3L0-P3P7-225 Led13-H3L1-P3P6-226 Led14-H3L2-P3P5-228 Led15-H3L3-P3P4-232
kled(lum)No description
kled(lum-blink)
Led is LUM value during duty on Interval Time, else OFF.
kled(sig)No description
kled(sig-8)No description
kled(sig-blink)No description
kpot(duty)No description
kpot(step)No description
ksegment7(ports)No description
kservo(rds3115)No description
ksonic(hcsr04)No description
kthermo(dewpoint)No description
kthermo(dht11)
Read Temperature in celcius, Relative Humidity in 0..1.0 .
kthermo(soundspeed)No description
To use the nodes in your project you should have the koadrobot/devices library installed. Use the “File → Add Library” menu item in XOD IDE if you don’t have it yet. See Using libraries for more info.