This page has no translation to Deutsch yet. The original English version is below. If you’d like to help, great! See how to translate a documentation page in the contribution guide.

Required Hardware

XOD is not tied to a particular vendor of hardware. It is compatible with various controller boards, sensors, and peripherals devices that can be programmed with Arduino IDE.

Nevertheless, for the best experience with this tutorial we recommend you using Arduino Starter Kit because it contains all the components you’ll need to complete the lessons.

Arduino Starter Kit

Components you’ll need #

  • 1× Arduino (or compatible) board
  • 1× USB cable
  • 1× Breadboard
  • 2× LED
  • 1× TMP36 temperature sensor
  • 1× Servo
  • 2× Tactile buttons
  • 1× Photoresistor (aka LDR)
  • 1× Potentiometer
  • 2× 220 or 330Ω resistors
  • 3× 10kΩ resistors
  • Jumper wires

Ready? #

Go to the first lesson →

Found a typo or mistake? Want to improve the text? Edit this page on GitHub and open a pull request. If you have a complex proposal or you want to discuss the content, feel free to start a new thread on XOD forum.