Libraries

Sort by
cesars/4017@0.1.15
Key Matrix Library ...of Marco Colli MD_4017_KM and 4017 node
2018-10-24 ⋯ 10 versions ⋯ 2020-04-18
cesars/4067@3.0.12
Control multiplexers 4067
2018-11-01 ⋯ 57 versions ⋯ 2020-03-25
bradzilla84/433mhz-rcswitch@0.0.4
Use your Arduino with a suitable transmitter to operate remote radio controlled devices. This method should work with most popular low-cost power outlet sockets and light switches with 315/433mHz support. All you need is an Arduino, ESP8266, etc, a 315/433MHz transmitter. And your existing remote control devices with a SC5262 / SC5272, HX2262 / HX2272, PT2262 / PT2272, EV1527, RT1527, FP1527 or HS1527 chipset. Also supports Intertechno outlets. (Initial testing works great but further testing is needed)
2019-02-02 ⋯ 4 versions ⋯ 2019-02-25
wayland/433mhz-rf-module@0.0.3
Arduino library for 433MHz RF transmitter and receiver modules. Wraps the RH_ASK driver from the RadioHead Packet Radio library for embedded microprocessors (https://www.airspayce.com/mikem/arduino/RadioHead/).
2019-10-23 ⋯ 3 versions ⋯ 2019-10-28
gabbapeople/4d-ulcd@0.0.5
Library to work with gen4-ulcd-D/DT display modules by 4D Systems. This library describes basic operations with common ViSI-Genie objects of the 4D Systems workshop IDE.
2018-12-26 ⋯ 4 versions ⋯ 2018-12-26
gst/4digits-sevensegment@1.0.3
number to 4 digits 7 segment Display with decimal point. Version vor segment output latching with sn74hc573
2018-10-12 ⋯ 4 versions ⋯ 2018-10-14
donald-emerson/7-segment@0.0.0
No description
2020-02-22
dancojocaru2000/7-segment@1.0.1
Provides nodes in order to interact with 7 segment displays
2019-02-12 ⋯ 2 versions ⋯ 2019-02-12
bradzilla84/74hc595@0.0.4
The 74HC595 is a “8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. Normal use 3 pins, or 5 pin with Enable and Clear. (With the assistance of Cesars)
2018-11-25 ⋯ 4 versions ⋯ 2018-11-28
danya/74hc595n@1.1.0
using this library you can control the shift register
2020-06-09 ⋯ 2 versions ⋯ 2020-09-01
samele1222/7segment-num@0.0.8
7segment number display
2019-03-29 ⋯ 8 versions ⋯ 2019-04-01
sebastian-gaulocher/aaa@0.0.0
No description
2019-01-07
lightyagamy/ab@0.0.0
No description
2018-01-28
gst/absolutehumidity@0.1.1
Computes the absolute humidity of the air in gramm pro m³ . This is for example usefull to control ventilation systems.
2019-09-29 ⋯ 3 versions ⋯ 2019-09-29
ivanmason/accelstepper@0.1.2
A wraper library for Accelstepper. Copyright (C) 2012 Mike McCauley
2020-02-15 ⋯ 3 versions ⋯ 2020-02-16
hussainfawzi/ad9833-dds@0.0.0
Node for driving AD9833 DDS chip
2020-04-12
dinosalvioni/adafruit-motor-shield-v1@0.0.31
(beta) Libreria hardware dedicata alle espansioni per Arduino come pcf8574
2020-06-08 ⋯ 2 versions ⋯ 2020-06-08
awgrover/adafruitneopixel@2.0.0
awgrover/adafruit-neopixel-ll Arduino library for controlling single-wire-based LED pixels and strip. Mechanically converted by https://forum.xod.io/u/awgrover using github.com:awgrover/arduino-2-xod from: Adafruit NeoPixel (Adafruit_NeoPixel) by Adafruit. Version 1.1.7 https://github.com/adafruit/Adafruit_NeoPixel
2018-12-16
hussainfawzi/ads1115-16bit-adc@1.0.0
Node for ADS1115 16bit ADC by utilizing Adafruit Library on Github
2020-03-01
nkrkv/af-motor@1.1.0
Adafruit Motor Shield V1 communication. The old one based on two L293D and 74HC595 chip. Cloned by many vendors.
2017-12-15 ⋯ 3 versions ⋯ 2017-12-29
age3only/age3onlyunivrsal-led-timer-dimmer-push-button@0.0.1
It’s a Push switch operated universal timer dimmer. Where time period, duty cycle & dimming Could be decided by the user.
2018-04-07
nagygyurka/alkonykapcsolo@0.0.1
No description
2020-02-11
magnaride/analog-g-force-node@0.0.0
No description
2020-02-24
wayland/analog-read-no-port-check@0.0.2
Reads analog signal value from ADC port. Does not check if port is a valid analog port. Arduino Unos with DIP ICs typically only have six analog ports broken out to headers: A0-A5. SMD Unos (such as the Grove Beginner Kit) also have headers for ports A6 and A7, however the function isValidAnalogPort does not consider A6 and A7 to be valid ports and so the inbuilt analog-read node cannot be used with these ports. This library provides an alternative analog-read node which doesn't check if the analog port is valid.
2020-09-16 ⋯ 2 versions ⋯ 2020-09-16
evgen30/analog-rh-sensor@1.2.3
Универсальный датчик влажности воздуха.
2019-12-24