Libraries

Owner/LibnameDescriptionVersion
09efe09/mm
A crash course tutorial baked as a project
v0.14.0
aarzeon/fundamental-calculation
Calulation for redirecting a Joystickmovement into trigometically arranged cylinders.
v0.0.1
aarzeon/linearcounterNo descriptionv0.0.1
aarzeon/motorpositionNo descriptionv0.0.1
aarzeon/neigungNo descriptionv0.0.1
aarzeon/omega
Joystick translation to linear motion
v0.0.6
aarzeon/resetNo descriptionv0.0.0
aarzeon/rotationNo descriptionv0.0.1
aarzeon/tentacleNo descriptionv0.0.1
abendary/testNo descriptionv0.0.0
age3only/age3onlyunivrsal-led-timer-dimmer-push-button
It’s a Push switch operated universal timer dimmer. Where time period, duty cycle & dimming Could be decided by the user.
v0.0.1
age3only/rotary-encoder-with-button
This Library will simplify, connecting a rotary encoder hardware (With Push button-switch).
v0.0.0
age3only/time-period-action
To control the RTC Time output, in order to activate different equipment’s in different time's
v0.0.0
age3only/univrsal-led-timer-dimmer-push-button
push switch operated led dimmer blinker.
v0.0.0
algel/operatorsNo descriptionv0.0.1
alvsi100/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
anatolyrepin/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
arend/dddddNo descriptionv0.0.0
arkapravo-mandal44/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
artem-azanov/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
awgrover/midi
MIDI nodes: Note, CC, Prog Change. Needs more install: https://github.com/awgrover/xod_lib/blob/master/README.md#user-content-awgrovermidi. Please give feedback on https://forum.xod.io or https://github.com/awgrover/xod_lib
v1.3.3
awgrover/x-midi
Obsolete. See awgrover/midi
v1.2.3
ayad/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
bradzilla84/74hc595
The 74HC595 is a “8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. Normal use 3 pins, or 5 pin with Enable and Clear. (With the assistance of Cesars)
v0.0.4
bradzilla84/arduino-tft-lib
This library enables an Arduino board to communicate with the Arduino TFT LCD screen. It simplifies the process for drawing shapes, lines, images(COMING SOON), and text to the screen. The Arduino TFT library extends the Adafruit GFX, and Adafruit ST7735 libraries that it is based on. The GFX library is responsible for the drawing routines, while the ST7735 library is specific to the screen on the Arduino TFT. The Arduino specific additions were designed to work as similarly to the Processing API as possible. This is just a Wrapper for the Arduino TFT Library........
v0.1.0
bradzilla84/color-rgb-hsl
Some Base Color Blocks to implement in other Library's
v0.0.3
bradzilla84/color-tft-lcd-driver-mcufriend-kbv
Block for the MCUFRIEND_kbv range of TFT-LCD Touch Displays (Tested on the XC-4630 Duinotech clone, should work for all)
v0.0.1
bradzilla84/ftoled
For use with Freetronics OLED128 128x128 pixel OLED display(Just a test Lib, Stay tuned for Auduino TFT Lib to be released soon to support TFT LCD's in general)
v0.0.1
bradzilla84/i2c-pwm-servo-16ch
This is an example of the Adafruit 16-channel PWM & Servo driver Just a simple wrapper (NEEDS TESTING)
v0.0.1
bradzilla84/neopixel
Basic Functionality for NeoPixel Strip (See Examples)
v0.0.2
bradzilla84/preset-select
Just a quick example of a preset select/Pack/Unpack Patch...Can Be adjusted in code to more or less inputs (Unfortunately XOD doesn't support Variadic with more outputs than in..)
v0.0.3
bradzilla84/serial-plotter
Just a simple serial plotter that you can plot multiple signals at the same time (still in alpha)
v0.0.1
bradzilla84/singen
SinGen library. Generate's through PWM, two sinusoidal signals opposite each other, the frequency is determined by Hz
v0.0.1
bradzilla84/sleepydog
Adafruit SleepyDog Arduino Library Arduino library to use the watchdog timer for system reset and low power sleep. Currently supports the following hardware: Arduino Uno or other ATmega328P-based boards. Arduino Mega or other ATmega2560- or 1280-based boards. Arduino Zero, Adafruit Feather M0 (ATSAMD21). Arduino Leonardo or other 32u4-based boards. Partial support for Teensy 3.X and LC (watchdog, no sleep). Adafruit Trinket and other boards using ATtiny MCUs are NOT supported.
v0.0.1
bradzilla84/touch-adafruit
This is a touch display Wrapper for the common Adafruit TouchScreen. Can be used to map display to touch values and make Keypads and Menus.(More examle's to come)
v0.1.2
bradzilla84/x2125
Memsic MX2125 Dual-axis Accelerometer library for Arduino
v0.0.7
brusher/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
cesars/3-digit-multiplex-7segNo descriptionv1.3.8
cesars/4017
decade counter CD4017 carry reset
v0.1.6
cesars/4067
Control multiplexers 4067
v2.35.4
cesars/bit-shift-register
register 8 stage
v2.1.2
cesars/cesarsbit-shift-registerNo descriptionv2.0.2
cesars/cesarskeypad-4x-4-1wireNo descriptionv1.0.3
cesars/data-latch
Data latch type byte, number and logic
v0.1.0
cesars/keypad-4x-4-1wire
NO WORK
v1.0.1
cesars/keypad-4x4-1wire
4x4 matrix keyboard string boolean
v2.5.1
cky/p1No descriptionv0.0.0
datnguyen060697/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
donrecardo/just-testing-please-ignore
trying to learn how to make my own nodes
v0.0.0
dox/lcd-button-shield
Buttons and LCD-Display for use with "16x2 LCD Display Keypad Shield"
v0.0.5
dox/lcd-button-shiled
Obsolete
v0.0.3
dox/lcd-i2c
Nodes for use with I2C-Text-LCD-Displays
v0.0.2
dox/menuNo descriptionv0.0.2
dox/text-lcd-20x4-i2c
Edited text-lcd-16x2-i2c patch for use with 2004 LCD-Display
v0.0.2
dox/x-midi
Obsolete
v0.1.2
drbniccijj1/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
e/cap1188
A wrapper around Adafruit's CAP1188 Library (https://github.com/adafruit/Adafruit_CAP1188_Library)
v0.0.1
e/comparison
Additional nodes for comparing numbers
v0.1.0
e/mcp4725
MCP4725 12-bit I²C DAC Driver library
v0.1.0
e/traffic-light
--
v0.0.1
eriol/joystick-x-y
A simple X Y joystick for controlling stuff
v1.0.0
erlit/select-n
'Select' type nodes
v0.0.1
erlit/stateNo descriptionv0.0.0
escape-ford/encoder-ky040
Contains encoder KY040 patch, digital pullup input patch, example of usage. Encoder reads boolean inputs to obtain numerical value of revolution. Boolean outputs are used for clockwise and counterclockwise direction detection respectively.
v0.0.6
escape-ford/nth-string
Index nth string selector (1-4 strings)
v0.0.0
evgenykochetkov/testNo descriptionv0.0.2
evgenykochetkov/welcome-to-xod
A crash course tutorial baked as a project
v0.14.1
faberge/hysteresis
Hysteresis node to filter the input signal
v1.0.1
failsafe/k853518
Temperature sensor for the DuinoTech K853518.
v0.0.2
failsafe/upownNo descriptionv0.0.1
fortunatoa3/linelogic
*Test for linefollower robot* Nodes linelogic3 and linelogic4 This nodes get 3 or 4 boolean data, and outputs one number for each case of possible combinations.
v0.0.1
fpoorte/leddemoNo descriptionv0.0.0
frape/analogbuttons
A crash course tutorial baked as a project
v0.14.1
frape/indicator
A crash course tutorial baked as a project
v0.14.0
frape/relemotor
A crash course tutorial baked as a project
v0.14.0
furas38/welcome-to-xod
A crash course tutorial baked as a project
v0.14.0
gabbapeople/blynk
The library to connect XOD to Blynk via Bluetooth (BLE).
v0.0.3
gabbapeople/christmas-treeNo descriptionv0.0.1
gabbapeople/color
Library to work with color in XOD
v0.0.1
gabbapeople/electricity-meter
Library for the "money-counter" device.
v0.0.1
gabbapeople/esc
Library for common hobby ESC devices.
v0.0.3
gabbapeople/iot-split-flap-display
Program for the split-flap dispay. The display shows the weather conditions and temerature using the AccuWeather API.
v0.0.4
gabbapeople/mbot-lib
This library was made for an mBot platform created by Makeblock. To read more follow: https://medium.com/p/c3e310f8eceb https://medium.com/p/2ae4a4862a9e https://medium.com/p/6c420600271e
v1.2.3
gabbapeople/on-board-computer
The library is for the "Arduino in near space" project.
v0.0.2
gabbapeople/simple-byte-protocol
A simple communication protocol for a UART interface. To read more follow https://medium.com/p/9ce67cc69d3c
v0.0.5
gabbapeople/uart-led-control
Exchanging data between two Arduino boards.
v0.1.5
gregmotorshop/time
Convert a number (seconds) into three strings (hours / minutes / seconds) + Convert a number (seconds) into a string (HHh MMmn SSs)
v0.14.2
gst/4digits-sevensegment
number to 4 digits 7 segment Display with decimal point. Version vor segment output latching with sn74hc573
v1.0.3
gst/digital-read-pullup
Digital read with integrated pullup resistor
v1.0.0
gst/number-choice-stringNo descriptionv1.0.0
gst/number-split-to-digit
split´s a number e.g. 2345 into digits 2-3-4-5 numbers between 0 and 9999 are allowed
v1.0.0
gst/sevensegment
number 0-15 to 7segment 0-f
v1.0.0
gst/time-delay
various time relays
v1.0.1
gweimer/h-bridge
Expanded h-bridge node to handle h-bridge with 2 direction pins for a single motor.
v0.0.1
gweimer/hc-sr04-ultrasonic
Copy of std Ultrasonic range, but returns Max distance on failure so we can assume nothing close to us. My sensor seems to go low on ping capture, not success, so I changed timeout to max round trip to get full range.
v0.0.2
gweimer/ir-remote
Read IR remote
v0.0.4
gweimer/lcd-i2c-init
Update LCD display on I2C. Specify Columns and up to 4 Rows. Init pin can be used to prevent extra clear displays. Passing null string for a Line will leave the line untouched.
v0.0.5
gweimer/servo
Enhanced servo implementations to detach servo and allow it to free-wheel (or allow other nodes to control the servo)
v0.0.4
gweimer/traffic-light-advanced
The next step in your learning once you understand the simple traffic light example provided in the XOD documentation. Updated for XOD v0.20.x
v0.1.1
gweimer/utils
General Utilities. Updated for XOD v0.20.x
v0.1.5