Libraries

bradzilla84/mlx90614-ir-temp-sensor@0.1.0
This is a library for the MLX90614 Non-Contact IR temperature sensor.
2019-02-02
bradzilla84/visi-genie-extra-library@0.1.5
This is an extention to the fine work of gabbapeople's ViSi Genie Library and will install it automaticly allong with ALL the ViSi Genie Objects (some Blocks still need to be tested)
2019-01-16 ⋯ 6 versions ⋯ 2019-01-19
awgrover/buffer1@1.0.0
buffer1 Buffer object A buffer of bytes/words for other libraries that need a buffer https://github.com/awgrover/xod-buffer
2019-01-14
e/mcp4725@0.2.0
MCP4725 12-bit I²C DAC Driver library
2018-02-10 ⋯ 2 versions ⋯ 2019-01-09
sebastian-gaulocher/bbb@0.0.0
No description
2019-01-07
sebastian-gaulocher/aaa@0.0.0
No description
2019-01-07
gst/average@1.0.0
Average a incomming number at the output.
2019-01-03
aarzeon/fundamental-calculation@0.1.0
Calulation for redirecting a Joystickmovement into trigometically arranged cylinders.
2018-12-08 ⋯ 2 versions ⋯ 2018-12-28
gabbapeople/4d-ulcd@0.0.5
Library to work with gen4-ulcd-D/DT display modules by 4D Systems. This library describes basic operations with common ViSI-Genie objects of the 4D Systems workshop IDE.
2018-12-26 ⋯ 4 versions ⋯ 2018-12-26
yzheka-m/mpu-9250@1.0.3
MPU-9250 sensor library
2018-12-06 ⋯ 4 versions ⋯ 2018-12-20
ross/ross@0.0.0
No description
2018-12-18
bradzilla84/kalman-filter@0.0.2
A simplified one dimensional Kalman filter implementation for Arduino.
2018-12-17 ⋯ 2 versions ⋯ 2018-12-17
awgrover/conversions@1.0.0
utility conversions to bridge different worlds: data-to-pulse, true-to-pulse
2018-12-16
nkrkv/stepdir@1.0.0
Drives stepper motors connected through a step/dir driver board
2018-12-14
yzheka-m/nokia-5510-display@1.0.4
Library for nokia 5510 monochrome display
2018-12-07 ⋯ 5 versions ⋯ 2018-12-11
bradzilla84/sleepydog@0.0.1
Adafruit SleepyDog Arduino Library Arduino library to use the watchdog timer for system reset and low power sleep. Currently supports the following hardware: Arduino Uno or other ATmega328P-based boards. Arduino Mega or other ATmega2560- or 1280-based boards. Arduino Zero, Adafruit Feather M0 (ATSAMD21). Arduino Leonardo or other 32u4-based boards. Partial support for Teensy 3.X and LC (watchdog, no sleep). Adafruit Trinket and other boards using ATtiny MCUs are NOT supported.
2018-12-08
aarzeon/reset@0.0.0
No description
2018-12-08
bradzilla84/color-tft-lcd-driver-mcufriend-kbv@0.0.1
Block for the MCUFRIEND_kbv range of TFT-LCD Touch Displays (Tested on the XC-4630 Duinotech clone, should work for all)
2018-12-07
bradzilla84/color-rgb-hsl@0.0.3
Some Base Color Blocks to implement in other Library's
2018-12-06 ⋯ 3 versions ⋯ 2018-12-06
bradzilla84/serial-plotter@0.0.1
Just a simple serial plotter that you can plot multiple signals at the same time (still in alpha)
2018-12-06
bradzilla84/singen@0.0.1
SinGen library. Generate's through PWM, two sinusoidal signals opposite each other, the frequency is determined by Hz
2018-12-05
algel/operators@0.0.1
No description
2018-12-02
nkrkv/text@1.1.0
Text manipulation
2018-11-09 ⋯ 2 versions ⋯ 2018-11-30