MIDI nodes: Note, CC, Prog Change. Needs more install: https://github.com/awgrover/xod_lib/blob/master/README.md#user-content-awgrovermidi. Please give feedback on https://forum.xod.io or https://github.com/awgrover/xod_lib

Obsolete. See awgrover/midi

test codes for some proyects

only get the out after the time delay

A crash course tutorial baked as a project

This will filter and stabilize a noisy signal. If tuned well, it can be very fast and precise.

Some utilities (counters and pulse multiplexers) for menu based aplications. Also patches for the 20 x 4 i2c LCD display (now with cursor indicator opotion); the HP50827340 1 digit hexadecimal display and the Iduino Joystick Shield V1.A. Also there is a pulse decoder for rotary encoders and a patch to format an integer in n number of spaces, right justified.

Librería de utilidades

Use your Arduino with a suitable transmitter to operate remote radio controlled devices. This method should work with most popular low-cost power outlet sockets and light switches with 315/433mHz support. All you need is an Arduino, ESP8266, etc, a 315/433MHz transmitter. And your existing remote control devices with a SC5262 / SC5272, HX2262 / HX2272, PT2262 / PT2272, EV1527, RT1527, FP1527 or HS1527 chipset. Also supports Intertechno outlets. (Initial testing works great but further testing is needed)

The 74HC595 is a “8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. Normal use 3 pins, or 5 pin with Enable and Clear. (With the assistance of Cesars)

This library enables an Arduino board to communicate with the Arduino TFT LCD screen. It simplifies the process for drawing shapes, lines, images(COMING SOON), and text to the screen. The Arduino TFT library extends the Adafruit GFX, and Adafruit ST7735 libraries that it is based on. The GFX library is responsible for the drawing routines, while the ST7735 library is specific to the screen on the Arduino TFT. The Arduino specific additions were designed to work as similarly to the Processing API as possible. This is just a Wrapper for the Arduino TFT Library........

Just a bunch of utilities, Nodes and Conversions

Some Base Color Blocks to implement in other Library's

Block for the MCUFRIEND_kbv range of TFT-LCD Touch Displays (Tested on the XC-4630 Duinotech clone, should work for all)

For use with Freetronics OLED128 128x128 pixel OLED display(Just a test Lib, Stay tuned for Auduino TFT Lib to be released soon to support TFT LCD's in general)

This is an example of the Adafruit 16-channel PWM & Servo driver Just a simple wrapper (NEEDS TESTING)