sim7020-exe-csq

gabbapeople/sim7020/sim7020-exe-csq

Sends "AT+CSQ" execution command to SIM7020 module. "AT+CSQ" command returns received signal strength indication RSSI and channel bit error rate BER from the ME.
sim7020-exe-csq
@/sim7020-exe-csq
Sends "AT+CSQ" execution command to SIM7020 module. "AT+CSQ" command returns received signal strength indication RSSI and channel bit error rate BER from the ME.
UARTxod/uart/uart
An UART interface to which sim7020 module is wired.
SENDpulse
Triggers writting of the AT command.
sim7020-exe-csq
RESP
DONE
OK
ERR
TOUT
UART
SEND
TOUTpulse
Pulses when no response is received after a timeout.
ERRpulse
Pulses when the response is received and the response string contains the "ERROR" char sequence.
OKpulse
Pulses when the response is received and the response string contains the "OK" char sequence.
DONEpulse
Pulses when the response is received.
RESPstring
A string that contains the AT command response. May contain CR and LF terminal sequences.
To use the node in your project you should have the gabbapeople/sim7020 library installed. Use the “File → Add Library” menu item in XOD IDE if you don’t have it yet. See Using libraries for more info.