pwm-load-switch
gb79126/webasto-prova/pwm-load-switch
switches PWM load between set value and zero
pwm-load-switch
@/pwm-load-switch
switches PWM load between set value and zero
PORTport
Board port to write to. If the port supports hardware PWM it will be used. If not, it will be set high for values greater than 0.5 and set low otherwise
VALnumber
Sets PWM duty cycle for the load in the range [0; 1] where 0.0 is full off and 1.0 is full on
ENABLEboolean