portd-write
krishowell/port-read-write/portd-write
Writes the signal value to pins selected from the pin input. of PORTD registry.
ex - 0011 0001b input write the SIG value to pins 0, 4, and 5.
portd-write
@/portd-write
Writes the signal value to pins selected from the pin input. of PORTD registry.
ex - 0011 0001b input write the SIG value to pins 0, 4, and 5.
PINbyte
A binary number that represents each pin of the target hardware on PORTD.
Setting a bit to "1" selects the pin for writing.
The most significant bit is first and the least significant is last.
ex- ardunio uno most significant bit is pin 0 and the least significant is pin 7
UPDpulse
SIGboolean
the value that is written to the selected pins.
DONEpulse
Outputs a pulse when the code has finish writing to the PORTD registry
C++ implementation
struct State {
};
{{ GENERATED_CODE }}
void evaluate(Context ctx) {
if (!isInputDirty<input_UPD>(ctx))//This line controls how often this codes run.
return;
byte PIN = getValue<input_PIN>(ctx);//The PIN varible retrieves the byte input node value
const bool SIG = getValue<input_SIG>(ctx);
for(uint8_t i = 0; i < 8; i++, PIN = PIN >> 1){
if(PIN & B00000001){
::pinMode(i, OUTPUT);
::digitalWrite(i, SIG);
}
}
emitValue<output_DONE>(ctx, 1);
}