imu-click-detector
wayland/wio-terminal-sensors/imu-click-detector
Click detector using inertial measurement unit (LIS3DH).
imu-click-detector
@/imu-click-detector
Click detector using inertial measurement unit (LIS3DH).
ENboolean
Enable the click-detector.
RATEbyte
Data rate. Options: 01h = 1 Hz, 02h = 10 Hz, 03h = 25 Hz, 04h = 50 Hz, 05h= 100 Hz, 06h = 200 Hz, 07h = 400 Hz (default), 00h = powered down, 08h = 1.6 kHz (low power), 09h = 5 kHz (low power).
RANGEbyte
Range. Options: 00h = +/- 2g (default), 01h = +/- 4g, 02h = +/- 8g, 03h = +/- 16g.
THRESHOLDbyte
Adjust this number for the sensitivity of the 'click' force. This strongly depends on the range! For 16G, try 5-10; for 8G, try 10-20; for 4G, try 20-40; for 2G, try 40-80.
T-LIMITbyte
Time limit (default = 10). To convert to seconds divide by data rate. For example, if the data rate is 400Hz, then the default value of 10 is equivalent to a time limit of 25 ms.
T-LATENCYbyte
Time latency (default = 20). To convert to seconds divide by data rate. For example, if the data rate is 400Hz, then the default value of 20 is equivalent to a latency of 50 ms.
T-WINDOWbyte
Time window (default = 255). To convert to seconds divide by data rate. For example, if the data rate is 400Hz, then the default value of 255 is equivalent to a time window of 637.5 ms.
DONEpulse
Pulse after checking for click (tap).
DBLpulse
Pulse if double "click" (tap) detected.
SNGpulse
Pulse if single "click" (tap) detected.