Arduino library for 433MHz RF transmitter and receiver modules. Wraps the RH_ASK driver from the RadioHead Packet Radio library for embedded microprocessors (https://www.airspayce.com/mikem/arduino/RadioHead/).
2019-10-23 ⋯ 3 versions ⋯ 2019-10-28
Libraries
Sort by
Newest
wayland/433mhz-rf-module@0.0.3
gabbapeople/whiteboard-races@0.0.1
Library contains the patch for the https://www.instructables.com/id/E391HPFK1ORLQR6/ project
2019-10-17
xod-dev/text-lcd@0.31.1
Nodes to drive a common text liquid crystal displays with I²C or parallel interfaces.
2019-10-01 ⋯ 2 versions ⋯ 2019-10-08
xod-dev/st-mems@0.31.1
Nodes to work with gyroscopes, accelerometers and barometers based on chips by STMicroelectronics: L3G4200, L3GD20H, LIS331DLH, LIS331HH, LIS3DH, LPS331.
2019-10-01 ⋯ 2 versions ⋯ 2019-10-08
xod-dev/hc-sr04@0.31.1
Nodes to work with the HC-SR04 ultrasonic range meters.
2019-10-01 ⋯ 2 versions ⋯ 2019-10-08
xod-dev/dht@0.31.1
Nodes to work with DHT11 or DHT21 sensors, or compatible sensors: RHT01, DHT22, DHT33, DHT44, AM2301, HM2301, AM2302, AM2303, RHT02, RHT03, RHT04, RHT05.
2019-10-01 ⋯ 2 versions ⋯ 2019-10-08
xod/json@0.31.1
Nodes for parsing JSON from a stream of characters
2019-10-01 ⋯ 2 versions ⋯ 2019-10-08
amperka/octoliner@0.1.5
Library to work with the "Octoliner" breakout board by Amperka. "Octoliner" represents 8-channeled infrared line sensor based on TCRT5000 optocouplers and the GPIO ports expander controlled throuht the I2C bus.
2019-10-01 ⋯ 6 versions ⋯ 2019-10-10
gst/absolutehumidity@0.1.1
Computes the absolute humidity of the air in gramm pro m³ . This is for example usefull to control ventilation systems.
2019-09-29 ⋯ 3 versions ⋯ 2019-09-29
timothymknapp/feels-like-temp-lcd-rgb@1.0.0
This takes the temp and relative humidity from a dht11 and converts the information to a "feels like temp". the humidity , temp and "feels like temp" are displayed on an lcd (i2c). the "feels like temp" is also mapped to a nrgb led. the led turns blue when cold, green when comfortable and red when hot.
2019-09-19
nickprogramm/lightsyntax@1.0.1
LightSyntax library for XOD(https://nickprogramm.github.io/LightSyntax)
2019-09-14 ⋯ 2 versions ⋯ 2019-09-25
cesars/motor@0.0.6
Library for L9110 motor driver controlling small DC motors.
2019-09-05 ⋯ 6 versions ⋯ 2019-09-11
gabbapeople/sim7020@0.5.3
Library to work with NB-Not (Narrow Band Internet of Things) module SIM7020 with built-in support network Protocol MQTT (message queuing telemetry transport). This Library is a tool for working with AT commands and can be easily converted to work with other modules of the SIMCOM family.
2019-08-20 ⋯ 51 versions ⋯ 2019-10-15
wayland/vl53l0x-time-of-flight@0.0.2
Time-of-Flight (ToF) sensor. Arduino library for the ST VL53L0X sensor (https://www.st.com/en/imaging-and-photonics-solutions/vl53l0x.html). Wraps the Pololu VL43L0X library for Arduino (https://github.com/pololu/vl53l0x-arduino).
2019-08-11 ⋯ 2 versions ⋯ 2019-08-11
ironcandleforge/l298n-dual-h-bridge-stepper-motor-driver-module@0.0.1
This is a simple library for controlling the L298N Stepper Motor Driver Controller Board Dual H Bridge Module.
This module is readly available on amazon and is easy to use for single/dual motor control or as a stepper motor driver.
2019-08-07
ironcandleforge/ir-obstacle-avoidance-sensor@0.0.1
http://osoyoo.com/2017/07/24/arduino-lesson-obstacle-avoidance-sensor/
This object inverts the return to show True when the sensor detects an obstacle.
The Enable Pin is onlused on the 4 Pin version of this sensor and is used to turn the pin on and off.
2019-08-06
johnnaldinoangelo/h-bridge-dc-motor@0.0.2
Bidirectional speed control of a motor using H-bridge L298n
2019-08-02 ⋯ 2 versions ⋯ 2019-08-02
johnnaldinoangelo/motorspeedcontrol@0.0.0
Bidirectional speed control of a motor using H-bridge L298N and variable resistor
2019-08-02