Libraries

dgekan/welcome-to-xod@0.29.0
A crash course tutorial baked as a project
2024-02-19
5016336/1@0.0.0
No description
2024-02-17
wayland/lis3dh-accelerometer-spi@0.0.1
LIS3DH triaxial accelerometer on an SPI bus. Wraps https://github.com/adafruit/Adafruit_LIS3DH. Datasheet: http://www.st.com/resource/en/application_note/cd00290365.pdf. N.B. this library has not been tested.
2024-02-14
wayland/encoder@0.0.3
Quadrature Encoder Library for Arduino. Wraps https://github.com/PaulStoffregen/Encoder.
2024-02-09 ⋯ 3 versions ⋯ 2024-02-09
nazarijtipusak080/esr-and-c-metr@0.0.0
Contains the nodes of my project: ESR meter and Capacitance meter
2024-02-06
nazarijtipusak080/esr@0.0.0
No description
2024-02-06
nazarijtipusak080/esr-c-metr@0.0.0
No description
2024-02-06
nicknick/my-nodes@0.0.1
No description
2024-01-26 ⋯ 2 versions ⋯ 2024-01-26
mcnikolson/welcome-to-xod@0.29.0
A crash course tutorial baked as a project
2024-01-25
gb79126/webasto-v4@4.2.4
Controller for the webasto thermotop C diesel coolant heater ECU (also applicable to the chinese knock offs) , a modified version of the Webastardo board originally designed by Simon Raffrey that runs on arduino IDE written code. It handles the various procedures for starting up, pid combustion manager to reach and maintain a set coolant temperature and shutting down sequence, as well as various safety, alarms, standby, information display and input via rotary encoder. At the moment is missing BLE functionality to use a phone app to control it remotely.
2024-01-03 ⋯ 38 versions ⋯ 2024-01-20
maksimbaturin/non-volatile-u32-counter@0.0.1
A non-volatile integer counter with a calculation result from 0.00 to 4294967000.00. The result of the calculations is converted into a 32-bit unsigned integer, represented as four bytes. The result of the calculations is recorded in the eeprom by a signal from the voltage monitoring port. After resuming the voltage on the chip, the eeprom is read first, followed by further calculations. The resulting number can be further used in subsequent calculations or displayed on the LCD.
2024-01-16 ⋯ 2 versions ⋯ 2024-01-18
wkov/colony@1.0.4
Extension pack for Amperka Colony
2023-12-09 ⋯ 5 versions ⋯ 2024-01-06
edc/grafik@0.0.0
No description
2023-12-31
maksimbaturin/filament-counter@0.0.0
It became necessary to create a filament counter for your 3d printer. During the writing of the program, I created a new multiplication node. I used the hall sensor and the ssd1306 LED display on the i2c bus .
2023-12-30
ahmedbabu/double-dip@0.0.0
No description
2023-12-14
nazarijtipusak080/menu-item-and-value@1.0.7
Contains nodes of items and values ​​for creating a menu when working with displays, there is a sample of creating "my-menu", and based on it, an example of using a menu in a real project is given. Example and Example2 tested on "arduino uno":).
2023-12-03 ⋯ 9 versions ⋯ 2023-12-09
zs75/samol@0.0.6
No description
2020-11-05 ⋯ 6 versions ⋯ 2023-11-28
zs75/zs75samol@0.0.4
No description
2023-11-28
zs75/minmaxszamlalo@0.0.0
No description
2023-11-28
wayland/sht2x-rh-temp@0.0.3
Library for the Sensirion SHT2x series of humidity and temperature sensors. Wraps https://github.com/RobTillaart/SHT2x. Datasheet for SHT21: https://sensirion.com/resource/datasheet/sht21
2022-01-27 ⋯ 3 versions ⋯ 2023-11-19
wayland/wio-terminal-lcd-templates@0.0.2
This library will provide a collection of display templates for the Wio Terminal. At present the library contains just one template: a four panel display.
2023-11-18 ⋯ 2 versions ⋯ 2023-11-19
wayland/sgp30@0.0.1
Sensirion SGP30 Indoor Air Quality (IAQ) sensor. Wraps https://github.com/adafruit/Adafruit_SGP30. Datasheet: https://sensirion.com/media/documents/984E0DD5/61644B8B/Sensirion_Gas_Sensors_Datasheet_SGP30.pdf.
2023-11-18
wayland/sht4x@0.0.1
SHT4x relative humidity and temperature sensor. Tested using an SHT40 device. Wraps https://github.com/adafruit/Adafruit_SHT4X
2023-11-17
bami12100/water-sensor@0.0.2
The water sensor node
2023-11-15 ⋯ 3 versions ⋯ 2023-11-15