buffer1 Buffer object A buffer of bytes/words for other libraries that need a buffer https://github.com/awgrover/xod-buffer

MCP4725 12-bit I²C DAC Driver library

Average a incomming number at the output.

Calulation for redirecting a Joystickmovement into trigometically arranged cylinders.

Library to work with gen4-ulcd-D/DT display modules by 4D Systems. This library describes basic operations with common ViSI-Genie objects of the 4D Systems workshop IDE.

MPU-9250 sensor library

A simplified one dimensional Kalman filter implementation for Arduino.

utility conversions to bridge different worlds: data-to-pulse, true-to-pulse

Drives stepper motors connected through a step/dir driver board

Library for nokia 5510 monochrome display

Adafruit SleepyDog Arduino Library Arduino library to use the watchdog timer for system reset and low power sleep. Currently supports the following hardware: Arduino Uno or other ATmega328P-based boards. Arduino Mega or other ATmega2560- or 1280-based boards. Arduino Zero, Adafruit Feather M0 (ATSAMD21). Arduino Leonardo or other 32u4-based boards. Partial support for Teensy 3.X and LC (watchdog, no sleep). Adafruit Trinket and other boards using ATtiny MCUs are NOT supported.

Block for the MCUFRIEND_kbv range of TFT-LCD Touch Displays (Tested on the XC-4630 Duinotech clone, should work for all)

Some Base Color Blocks to implement in other Library's

Just a simple serial plotter that you can plot multiple signals at the same time (still in alpha)

SinGen library. Generate's through PWM, two sinusoidal signals opposite each other, the frequency is determined by Hz

Text manipulation

This is a touch display Wrapper for the common Adafruit TouchScreen. Can be used to map display to touch values and make Keypads and Menus.(More examle's to come)

The 74HC595 is a “8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.” In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. Normal use 3 pins, or 5 pin with Enable and Clear. (With the assistance of Cesars)