Library provides a single node for calculating the simple moving average (https://en.wikipedia.org/wiki/Moving_average#Simple_moving_average). Based on https://github.com/ThingEngineer/movingAvgFloat which in turn is derived from https://github.com/JChristensen/movingAvg

Library for Nextion displays. Wraps Athanasios Seitanis's Easy Nextion Library (https://github.com/Seithan/EasyNextionLibrary).

Linked LEDs with buttons and fade effect

A crash course tutorial baked as a project

A crash course tutorial baked as a project

This patch allows to readout a 4x4 numpad connected with all 8 wires to the arduino. Use 10 k Resistors on the 4 read-pins on ground to get some pulldown. Testing required.

TM1637 v2 based in library RichUNO

common utilities for projects

common utilities for projects

Allows the use of multiple buttons on a single analog input. Each button to be wired in series with differing levels of resistors to create voltage outputs of differing values.

Long press button / toggle node. Press and hold input button for desired count and count interval to flip-flop between true / false output.

A crash course tutorial baked as a project

Library for TI's ADS1115 16-bit ADC. Wraps https://github.com/adafruit/Adafruit_ADS1X15. Work in progress - limited testing!

Supports alternativ PWM frequencies for MEGA2560 Attention! Timer0 is also used for other tasks (millis, micros, delay). Timer0 = D4 and D13 Timer1 = D11, D12 Timer2 = D9, D10 Timer3 = D2, D3, D5 Timer4 = D6, D7, D8 Timer5 = D44, D45, D46 Prescaler 1= 31372,55Hz, 2= 3921,16Hz, 3= 490Hz, 4= 122.55Hz 5= 30Hz (in case of timer0 the PWM frequency for prescaler values 1-5 are doubled)

XOD library to interface with the Amperka SegM8 display module.