unique 24-bit high accuracy hx-711 to measure every thing more accurate with XOD IDE time number of sample, gain is equal 80h and chose your pins for Dout and SCk connected to your module and UPD on loop or what ever you want, any issue contact : support@stm32avr.com
unique 24-bit high accuracy hx-711 to measure every thing more accurate with XOD IDE time number of sample, gain is equal 80h and chose your pins for Dout and SCk connected to your module and UPD on loop or what ever you want
The following library is used for work with dimmer, it gives ability to control large ammoun of dimmer. This lib used with Leonardo, Mega, UNO, ESP8266, ESP32, Arduino M0, Arduino Zero, Arduino Due, STM32.
As long as the board is supported by XOD
Reads analog signal value from ADC port. Does not check if port is a valid analog port. Arduino Unos with DIP ICs typically only have six analog ports broken out to headers: A0-A5. SMD Unos (such as the Grove Beginner Kit) also have headers for ports A6 and A7, however the function isValidAnalogPort does not consider A6 and A7 to be valid ports and so the inbuilt analog-read node cannot be used with these ports. This library provides an alternative analog-read node which doesn't check if the analog port is valid.
DS18B20 digital temperature sensor. Enables use of multiple DS18B20 devices on a single one-wire bus. Wraps https://github.com/milesburton/Arduino-Temperature-Control-Library and https://github.com/PaulStoffregen/OneWire.
This library was made for an mBot platform created by Makeblock.
To read more follow:
https://medium.com/p/c3e310f8eceb
https://medium.com/p/2ae4a4862a9e
https://medium.com/p/6c420600271e